Fitting Position: Pitman arm to 1st front axle ; Driver Position: for right-hand drive vehicles ; Parameter: DITAS ; Fitting Position: Front Axle ; Length [mm]: 871 mm ; Pipe Ø [mm]: 42 mm ; Cone Size [mm]: 26 mm ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Engine Code: D6A180 ; Length [mm]: 821 mm ; Inner thread [mm]: M30 x 1,5 mm ; Outer thread [mm]: M20 x 1,5 mm ; Thread Type: with right-hand thread ; Cone Size [mm]: 26 mm ; Rod/Strut: Push Rod ; Fitting Position: Front Axle ; Pipe Ø [mm]: 42 mm ; Weight [kg]: 8.9 kg ; ArticleState: Normal ; General Information: mit Kronenmuttern und Splinten, vom Lenkgetriebe zur 1.
Vorderachse
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Engine Code: D6A180 ; Length [mm]: 120 mm ; Outer thread [mm]: M22 x 1,5 mm ; Outer thread [mm]: M30 x 1,5 mm ; Thread Type: with right-hand thread ; Cone Size [mm]: 30 mm ; Fitting Position: Front Axle ; Weight [kg]: 1.77 kg ; ArticleState: Normal ; General Information: mit Sicherungsmutter
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Length [mm]: 871 mm ; Outer diameter [mm]: 42 mm ; Outer thread [mm]: M20 x 1,5 mm ; Outer thread [mm]: M30 x 1,5 mm ; Driver Position: for left-hand drive vehicles ; Cone Size [mm]: 26 mm ; Rod/Strut: Push Rod ; Pipe Ø [mm]: 42 mm ; Weight [kg]: 7.2 kg ; ArticleState: Normal ; General Information: mit Kronenmuttern und Splinten, vom Lenkgetriebe zur 1.
Vorderachse
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Engine Code: D6A180 ; Length [mm]: 871 mm ; Inner thread [mm]: M30 x 1,5 mm ; Outer thread [mm]: M20 x 1,5 mm ; Cone Size [mm]: 26 mm ; Rod/Strut: Push Rod ; Fitting Position: Front Axle ; Pipe Ø [mm]: 42 mm ; Weight [kg]: 7.05 kg ; ArticleState: Normal ; General Information: mit Kronenmuttern und Splinten, vom Lenkgetriebe zur 1.
Vorderachse
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Paired article numbers: 03135 ; Length [mm]: 105 mm ; Outer thread [mm]: M24 x 1,5 RHT mm ; Outer thread [mm]: M18 x 1,5 mm ; Thread Type: with right-hand thread ; Cone Size [mm]: 22 mm ; Fitting Position: Front Axle left and right ; Pipe Ø [mm]: 30 mm ; Weight [kg]: 0.84 kg ; ArticleState: Normal ; General Information: mit Kronenmutter und Splint
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Engine Code: D6B180 ; Length [mm]: 145 mm ; Inner thread [mm]: M30 x 1,5 RHT mm ; Outer thread [mm]: M20 x 1,5 mm ; Thread Length [mm]: 107 mm ; Thread Type: with right-hand thread ; Cone Size [mm]: 28.9 mm ; Fitting Position: Front Axle Right ; Weight [kg]: 1.55 kg ; ArticleState: Normal ; General Information: mit Kronenmutter und Splint
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Length [mm]: 893 mm ; Outer diameter [mm]: 40 mm ; Outer thread [mm]: M22 x 1,5 mm ; Outer thread [mm]: M30 x 1,5 mm ; Driver Position: for left-hand drive vehicles ; Cone Size [mm]: 30 mm ; Rod/Strut: Push Rod ; Pipe Ø [mm]: 40 mm ; Weight [kg]: 6.925 kg ; ArticleState: Normal ; General Information: mit Kronenmuttern und Splinten, vom Lenkgetriebe zur 1.
Vorderachse
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Length [mm]: 821 mm ; Width [mm]: 54 mm ; Thickness [mm]: 102 mm ; Inner thread [mm]: M30 x 1,5 mm ; Outer thread [mm]: M20 x 1,5 mm ; Cone Size [mm]: 26 mm ; Rod/Strut: Push Rod ; Fitting Position: Front Axle ; Pipe Ø [mm]: 38 mm ; Weight [kg]: 5.55 kg ; ArticleState: Normal ; General Information: mit Kronenmuttern und Splinten, vom Lenkgetriebe zur 1.
Vorderachse
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Paired article numbers: 18340 ; Length [mm]: 115 mm ; Width [mm]: 35 mm ; Thickness [mm]: 107 mm ; Outer thread [mm]: M20 x 1,5 mm ; Outer thread [mm]: M30 x 1,5 RHT mm ; Cone Size [mm]: 26 mm ; Fitting Position: Front Axle ; Weight [kg]: 1.335 kg ; ArticleState: Normal ; General Information: mit Kronenmutter und Splint
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Fitting Position: Pitman arm to 1st front axle ; Driver Position: for left-hand drive vehicles ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Length [mm]: 871 mm ; Cone Size [mm]: 26 mm ; Pipe Ø [mm]: 42 mm ; Supplementary Article/Supplementary Info: with accessories ; Fitting Position: Front Axle ; ArticleState: Normal
Fitting Position: Pitman arm to 1st front axle ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Length [mm]: 888 mm ; Cone Size [mm]: 26 mm ; Pipe Ø [mm]: 50 mm ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Fitting Position: Pitman arm to 1st front axle ; Driver Position: for right-hand drive vehicles ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Length [mm]: 871 mm ; Cone Size [mm]: 26 mm ; Pipe Ø [mm]: 42 mm ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Fitting Position: Pitman arm to 1st front axle ; Axle Load [t]: 4,7 t ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Length [mm]: 821 mm ; Cone Size [mm]: 26 mm ; Pipe Ø [mm]: 42 mm ; Supplementary Article/Supplementary Info: with accessories ; Fitting Position: Front Axle ; ArticleState: Normal
Fitting Position: Pitman arm to 1st front axle ; Driver Position: for left-hand drive vehicles ; Rod/Strut: Push Rod ; Cone Pitch: 1/10 ; Diameter [mm]: 42 mm ; Length [mm]: 870 mm ; Cone Size [mm]: 26 mm ; ArticleState: Normal
Fitting Position: Pitman arm to 1st front axle ; Driver Position: for right-hand drive vehicles ; Rod/Strut: Push Rod ; Cone Pitch: 1/10 ; Diameter [mm]: 42 mm ; Length [mm]: 870 mm ; Cone Size [mm]: 26 mm ; ArticleState: Article to be discontinued
Fitting Position: Pitman arm to 1st front axle ; Rod/Strut: Push Rod ; Cone Pitch: 1/10 ; Diameter [mm]: 42 mm ; Length [mm]: 821 mm ; Cone Size [mm]: 26 mm ; ArticleState: Normal
Fitting Position: Pitman arm to 1st front axle ; Rod/Strut: Push Rod ; Cone Pitch: 1/10 ; Diameter [mm]: 50 mm ; Length [mm]: 890 mm ; Cone Size [mm]: 26 mm ; ArticleState: Normal
Fitting Position: Pitman Arm to front axle ; Spring Design: Air Spring ; Spring Type: for vehicles with part-pneumatic suspension ; Required quantity: 1 ; Rod/Strut: Push Rod ; Pipe Ø [mm]: 52 mm ; Length [mm]: 871 mm ; Driver Position: for left-hand drive vehicles ; Weight [kg]: 9.15 kg ; ArticleState: Normal
Fitting Position: Pitman Arm to front axle ; Required quantity: 1 ; Rod/Strut: Push Rod ; Pipe Ø [mm]: 42 mm ; Length [mm]: 867 mm ; Driver Position: for right-hand drive vehicles ; ArticleState: Normal
Fitting Position: Pitman Arm to front axle ; Driver Position: for right-hand drive vehicles ; Required quantity: 1 ; Rod/Strut: Push Rod ; Pipe Ø [mm]: 42 mm ; Length [mm]: 821 mm ; Driver Position: for left-hand drive vehicles ; Weight [kg]: 6.82 kg ; ArticleState: Normal
Fitting Position: Pitman Arm to front axle ; Spring Design: Leaf spring ; Spring Design: Parabolic Spring ; Driver Position: for right-hand drive vehicles ; Required quantity: 1 ; Rod/Strut: Push Rod ; Pipe Ø [mm]: 40 mm ; Length [mm]: 893 mm ; Driver Position: for left-hand drive vehicles ; Weight [kg]: 7.55 kg ; ArticleState: Normal
Fitting Position: Pitman Arm to front axle ; Required quantity: 1 ; Rod/Strut: Push Rod ; Pipe Ø [mm]: 42 mm ; Length [mm]: 871 mm ; Driver Position: for left-hand drive vehicles ; Weight [kg]: 7.62 kg ; ArticleState: Normal
Fitting Position: Pitman Arm to front axle ; Required quantity: 1 ; Rod/Strut: Push Rod ; Pipe Ø [mm]: 30 mm ; Length [mm]: 978 mm ; Driver Position: for left-hand drive vehicles ; Weight [kg]: 3.98 kg ; ArticleState: Normal
Fitting Position: Pitman arm to 1st front axle ; Axle Load [t]: 4,7 t ; Length [mm]: 821 mm ; Pipe Ø [mm]: 42 mm ; Cone Pitch: 1/10 ; Cone Size [mm]: 26 mm ; Cone Size [mm]: 23.5 mm ; Thread Size: M30 x 1,5 RHT ; Rod/Strut: Push Rod ; ArticleState: Normal
Fitting Position: Pitman arm to 1st front axle ; Length [mm]: 890 mm ; Pipe Ø [mm]: 50 mm ; Cone Pitch: 1/10 ; Cone Size [mm]: 26 mm ; Cone Size [mm]: 23.5 mm ; Thread Size: M30 x 1,5 RHT ; Rod/Strut: Push Rod ; ArticleState: Normal
Length [mm]: 871 mm ; Outer diameter [mm]: 42 mm ; Outer thread [mm]: M 20 x 1,5 mm ; Outer thread [mm]: M 30 x 1,5 mm ; Cone Size [mm]: 26 mm ; Rod/Strut: Push Rod ; Pipe Ø [mm]: 42 mm ; ArticleState: Normal
Length [mm]: 821 mm ; Pipe Ø [mm]: 42 mm ; Cone Size [mm]: 26 mm ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Engine Code: M 40 ; Required quantity: 8 ; Length [mm]: 893 mm ; Pipe Ø [mm]: 40 mm ; Cone Size [mm]: 30 mm ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Length [mm]: 910 mm ; Pipe Ø [mm]: 42 mm ; Cone Size [mm]: 30 mm ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Length [mm]: 870 mm ; Pipe Ø [mm]: 52 mm ; Cone Size [mm]: 26 mm ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Length [mm]: 980 mm ; Pipe Ø [mm]: 30 mm ; Cone Size [mm]: 22 mm ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Length [mm]: 821 mm ; Pipe Ø [mm]: 42 mm ; Cone Size [mm]: 26 mm ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Length [mm]: 1106 mm ; Pipe Ø [mm]: 52 mm ; Cone Size [mm]: 31.5 mm ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Length [mm]: 870 mm ; Pipe Ø [mm]: 42 mm ; Cone Size [mm]: 26 mm ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Length [mm]: 893 mm ; Pipe Ø [mm]: 40 mm ; Cone Size [mm]: 30 mm ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Paired article numbers: 99 90 3135 ; Length [mm]: 105 mm ; Outer thread [mm]: M24 x 1,5 mm ; Outer thread [mm]: M18 x 1,5 mm ; Thread Type: with right-hand thread ; Cone Size [mm]: 22 mm ; Fitting Position: Front Axle left and right ; Pipe Ø [mm]: 30 mm ; Weight [kg]: 0.84 kg ; ArticleState: Normal ; General Information: mit Kronenmutter und Splint
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.